Monthly Archives: December 2012
Little Giant 506158 Big John Sump Pump
Little Giant 506158 Big John Sump Pump
For residential and light commercial use, the Model 6 Series sump pumps provide efficient and reliable service. For extended or continuous use in moving large volumes of water, these pumps feature a 1-1/2″ discharge with a maximum lift of 18′, a polycarbonate cover and a polypropylene volute/base. A choice of manual or automatic versions with various switch configurations provides user with the right pump for their needs.
Features:
- Cast iron pump housing with protective epoxy coating for corrosion resistance
- Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
- 1/3 HP shaded pole motor
- Stainless steel screws, bolts and handle to protect against corrosion
- Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) to assure maximum protection against pump failure
- Bearings: Upper and lower sintered sleeve bearings for extended motor life
- Thermal overload protection
- Manual and automatic models
- Automatic operation with pressure switch activates pump when water level is between 7″ and 10″. Pump shuts off when water level falls to between 1″ and 4″ (pressure switch is non-adjustable)
- Automatic operation with piggyback mechanical float switch activates pump when water level is between 9″ and 10-1/2″. Pump shuts off when water level falls to between 2″ and 3″ (pumping range is adjustable)
- 115 volt models
Specifications:
- Horsepower: 1/3
- Flow: 2750 GPH @ 5′ of Head
- Cord Length: 8′
- Shut Off: 18′
- Voltage: 115
- Hertz: 50/60
- Amps: 9
- Watts: 720
- Weight: 17.5 lbs.
- Height: 6″
- Width: 8.5″
- Length: 9.5″
Little Giant 90411101 Inline Constant Pressure Booster Pump
Little Giant 90411101 Inline Constant Pressure Booster Pump
Flow range: Up to 35 gpm (135 lpm)- Product power rating: 1.2 hp (0.9 kW)
- Minimum incoming pressure: 3 – 5 psi (0.2 – 0.3 bar)
- Minimum incoming flow rate and cisterns: flooded suction without water vortexing
- Maximum incremental pressure boost: 60 psi (4.1 bar)
- Maximum ambient operating temp: Continuous operation: 104 degrees (40 C)
- Maximum fluid operating temp: 104 degrees (40 C)
- Incoming voltage: 190 – 260 vac
- Frequency: 50/60 Hz
- Operating frequency range: 20 – 63 Hz
- Current (maximum): 12 Amps (rms)
- Pressure setting from factory: 50 psi (3.4 bar)
- Pressure adjustment range: 25 – 80 psi (1.7 – 5.5 bar)
- Relative humidity: 0 – 100% Condensi
- Shipping weight: 50 lbs. (22.7 kg)
Little Giant 558522 Submersible Deep Well Pump 2 Horsepower 22GPM
Little Giant 558522 Submersible Deep Well Pump 2 Horsepower 22GPM
60 Hz Single Phase
- 2 Horse Power
- 22 Gallons Per Minute At 145 Feet Max. Of 340 Feet
- Stainless Steel Shaft Features High Quality, Premium Materials At A Competitive Price
- 4 Performance Ranges – 5, 8, 12, And 22 Gpm
Little Giant 509204 Dominator 4/10 Horsepower Sewage Pump
Little Giant 509204 Dominator 4/10 Horsepower Sewage Pump
Features:
- Handles liquids and solid waste materials up to 2″ diameter
- Cast iron pump housing and cover with protective epoxy coating for corrosion resistance
- Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
- Stainless steel fasteners
- Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces)
- Thermal overload protection
- All 115 volt models are UL/CSA listed
Little Giant 554401 115V 60Hz 6Ft Condensate Removal
Little Giant 554401 115V 60Hz 6Ft Condensate Removal
The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation, with guaranteed serviceability and unmatched reliability, Little Giant Pump Company once again defines state-of-the-art in pump design.
Features:
- Vertical type pump unit
- 1/2 gallon leakproof, rustproof, ABS tank with mounting tabs
- Stainless steel motor shaft
- 3 drain holes
- 3/8″ O.D. barbed discharge adapter
- Built-in check valve
- Optional Safety Switch
- 15′ shut-off head
- 6′ power cord
- UL/CSA listed
- Thermal overload protected
- Suitable for High-Efficiency, gas furnace condensate
Construction:
- Motor: 1/60 HP
- Intermittent Liquid Temp: up to 120° F
- Discharge: 3/8″ OD barbed
- Housing: ABS
- Cover: ABS
- Volute: ABS
- Impeller: Glass filled polypropylene
Specifications:
- Horsepower: 1/50
- Flow: 65 GPH @ 1′ of Head
- Cord Length: 6′
- Shut Off: 15
- Voltage: 115
- Hertz: 60
- Amps: 1
- Watts: 60
- Weight: 4.4
- Height: 7″
- Width: 5″
- Length: 11″
Little Giant 566407 4300 GPH Waterfall/Stream Pump
Little Giant 566407 4300 GPH Waterfall/Stream Pump
Ideal for use in waterfall and stream applications, this powerful direct-drive pump features a unique dual-discharge design for operation of two water features simultaneously. This pump is extremely versatile, able to be used vertically or horizontally.
- Unique dual-discharge design allows for operation of two water features simultaneously
- Powerful direct-drive pump produces greater starting torque and flow pressure than comparable magnetic drive submersible pumps
- Corrosion-resistant body designed for non-potable submersible use
- Includes two 1-1/4″ MNPT x 1-1/4″ barbed elbow adaptor and a 1-1/4″ MNPT discharge cap
- Maximum pumping height of 30′
- Horsepower: 5/8
- Flow: 4280 GPH @ 1′ head (will vary according to your application)
- Cord length: 16′
- Voltage: 115
Little Giant 554425 115V 60Hz Condensate Removal Pump
Little Giant 554425 115V 60Hz Condensate Removal Pump
Our newest in condensate pump technology. A slimmer footprint… an oil resistant tank and check valve that eliminate the problem of cracked tanks exposed to oil… and numerous other features.
- VCMX-20ULS
- 1/4 turn check valve allows servicing without removal of tubing, eliminating water spills
- Patent-pending cooling design increases pump life
- Includes optional external overflow safety switch, which gives the option to connect air-handler shutdown or activate an alarm or building automation system
- External test/run lever for quick and easy drainage of tank for servicing
- Oil-resistant tank and check valve eliminates the problem of cracked tanks with exposure to oil
- Rubber feet absorb vibration on hard surface installations
- Slimmer footprint size offers flexibility in tight spaces
- Horsepower: 1/30
- Flow: 84 GPH @ 1′
- Cord Length: 6′
- Shut Off : 21′
- Voltage: 115
Little Giant 505176 Water Wizard 1/6 Horsepower Pump
Little Giant 505176 Water Wizard 1/6 Horsepower Pump
Includes garden hose adapter and removable inlet screen for easy cleaning. Lifetime oil supply. Pumps down to 1/8″ (3.2 mm.).
Item Number: 505176
Model Number: 5-MS
- 1/6 HP shaded pole motor with overload protection
- Designed for continuous duty
- Pumps down to 1/8”
- Garden hose adapter
- Removable inlet screen for easy cleaning
- Epoxy coated cast aluminum housing
- Viton shaft seal
Little Giant 521203 115V Small Submersible Pump 1-MA
Little Giant 521203 115V Small Submersible Pump 1-MA
Small submersible oil-filled pump with epoxy coated cast aluminum housing. For commercial, industrial, and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This company 170 GPH pump features a 1/4″ MNPT discharge, 7′ shut-off head capability, and screened inlet. Not recommended in the following applications: aquariums, swimming pools, and fuel oil transferring.
Item Number: 521203
Model Number: 1-MA
- 170 GPH @ 1 ft.
- Operates submersed
- 6′ cord
- Screened side inlet lessens pick-up of settled debris
- Epoxy-coated aluminum housing
- 1/4″ MNPT outlet accepts 1/2″ I.D. tubing
Little Giant 505000 Water Wizard 5-MSP 115V 60Hz Utility Pump
Little Giant 505000 Water Wizard 5-MSP 115V 60Hz Utility Pump
Features:
- Epoxy coated die-cast aluminum housing
- Oil-filled motor
- 26.3′ maximum lift
- 380 watts
- 1″ FNPT discharge
- Thermal overload protection
- For submersible use only
Construction:
- Motor: 1/6 HP oil filled
- Intermittent Liquid Temp. up to: 120°F
- Intake: Screened
- Discharge: 1″ FNPT
- Housing: Epoxy coated cast aluminum
- Cover: Epoxy coated cast aluminum
- Volute: Nylon
- Impeller: Nylon
- Shaft Seal: Viton®
- Screen: Nylon
Specifications:
- Horsepower: 1/6
- Flow: 1200 GPH @ 1′ of Head
- Cord Length: 10′
- Shut Off: 26.3
- Voltage: 115
- Hertz: 60
- Amps: 5
- Watts: 380
- Weight: 8.25 lbs.
- Height: 7.75″
- Width: 4.31″
- Length: 6.12″
