Features:

• Handles liquids and solid waste materials up to 2″ diameter
• Cast iron pump housing and cover with protective epoxy coating for corrosion resistance
• Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
• Stainless steel fasteners
• Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces)
• Thermal overload protection
• All 115 volt models are UL/CSA listed

The post Little Giant 509204 Dominator 4/10 Horsepower Sewage Pump appeared first on LittleGiantPumpReviews.com.

Includes garden hose adapter and removable inlet screen for easy cleaning. Lifetime oil supply. Pumps down to 1/8″ (3.2 mm.).

Item Number: 505176

Model Number: 5-MS

• 1/6 HP shaded pole motor with overload protection
• Designed for continuous duty
• Pumps down to 1/8”
• Garden hose adapter
• Removable inlet screen for easy cleaning
• Epoxy coated cast aluminum housing
• Viton shaft seal

The post Little Giant 505176 Water Wizard 1/6 Horsepower Pump appeared first on LittleGiantPumpReviews.com.

Small submersible oil-filled pump with epoxy coated cast aluminum housing. For commercial, industrial, and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This company 170 GPH pump features a 1/4″ MNPT discharge, 7′ shut-off head capability, and screened inlet. Not recommended in the following applications: aquariums, swimming pools, and fuel oil transferring.

Item Number: 521203

Model Number: 1-MA

• 170 GPH @ 1 ft.
• Operates submersed
• 6′ cord
• Screened side inlet lessens pick-up of settled debris
• Epoxy-coated aluminum housing
• 1/4″ MNPT outlet accepts 1/2″ I.D. tubing

The post Little Giant 521203 115V Small Submersible Pump 1-MA appeared first on LittleGiantPumpReviews.com.

Features:

• Epoxy coated die-cast aluminum housing
• Oil-filled motor
• 26.3′ maximum lift
• 380 watts
• 1″ FNPT discharge
• Thermal overload protection
• For submersible use only

Construction:

• Motor: 1/6 HP oil filled
• Intermittent Liquid Temp. up to: 120°F
• Intake: Screened
• Discharge: 1″ FNPT
• Housing: Epoxy coated cast aluminum
• Cover: Epoxy coated cast aluminum
• Volute: Nylon
• Impeller: Nylon
• Shaft Seal: Viton®
• Screen: Nylon

Specifications:

• Horsepower: 1/6
• Flow: 1200 GPH @ 1′ of Head
• Cord Length: 10′
• Shut Off: 26.3
• Voltage: 115
• Hertz: 60
• Amps: 5
• Watts: 380
• Weight: 8.25 lbs.
• Height: 7.75″
• Width: 4.31″
• Length: 6.12″

The post Little Giant 505000 Water Wizard 5-MSP 115V 60Hz Utility Pump appeared first on LittleGiantPumpReviews.com.

Little Giant offers a huge line of pumps for different applications, they have Wastewater Pumps, Magnetic Drive Pumps, Pool Pumps and Aquarium Pumps just to name a few. But what happens when you are in need of a new sewage pump for your sewage system? You can turn to Little Giant; they are the leaders in submersible sewage pumps. The 9S Cim is perfect for use in lift stations, as well as for residential homes that may need to pump out sewage or wastewater. The 9S-Cim is able to handle liquids and solid waste up to 2″ in diameter. The pump housing is made from a cast iron material and is protected with an epoxy coating to help protect against corrosion and rust. One of the better features of the 9S-Cim is that it is an oil filled motor housing, meaning that you will never have to worry about filling up your motor again. It will also help protect the motor from getting hot too fast.

The 9S-Cim offers models in either automatic operation or manual operation. The automatic operation will have up to 9″ and 14″ On Level and 2″ to 6″ Off Levels. The Pump Cover, Volute and Motor Housing are made from an epoxy coated cast iron material. The Impeller and the impeller type are Nylon and Vortex. The fasteners are stainless steel and the shaft is made of steel. The Mechanical Shaft Seal is made with Nitrile with Carbon and Ceramic faces. The bearings are upper sintered sleeve and the lower bearings are ball bearings. There are 7 different models in the 9S Series, all of the pumps work with a 4/10 horsepower. The 9S-Cim is available in a 115 or a 230 voltage. The other pumps work on a 115 voltage. All of the models have a 15 foot electrical cord except for the 9S-Cim-RFS, it has a 20 foot cord and it as a Piggyback Mechanical Float Switch.

You can find Little Giant Pumps in most local plumbing supply shops or local repair shops. You may have to shop around in order to find a price that fits your budget. If you are not convinced that Little Giant is the way to go, simply ask your local sales representative and go down and have a look. These pumps are safe and efficient and by using a Little Giant Submersible Sewage Pump you can actually save yourself money. Since your Little Giant Pumps works so well, you won’t have the need for many service calls anymore. Do some more research if you need, when it comes to sewage pumps, you really want to make sure that you are getting the best pump for your business or your home. When you use Little Giant you are using the best.

[DKB url=”” text=”” title=”” type=”” style=”” color=”” height=”” width=”” opennewwindow=”” nofollow=””]

The post Little Giant Pumps offers a huge line of pumps for different applications appeared first on LittleGiantPumpReviews.com.

When professional plumbers require a switch for a sump pump, they most often choose a  diaphragm like the  Little Giant Piggyback Diaphragm Switch.   Most sump pumps have  an average life span of 5-7 years. Most times, if the pump fails before that time, it is due to a problem with the switch. If you’re in need of a new sump switch,  it may be helpful to understand the different options that are available to you.

There are 3 basic switches for sump pumps:

1. Diaphragm Switch
2. Vertical Action Float
3. Tethered Float

Diaphragm Switch

Diaphragm switches such as the Little Giant Piggyback Diaphragm Switch are the best switches for submersible sumps.  When the water level rises, it also increases the pressure and this activates the switch to turn on the sump pump. When the water level drops, the diaphragm switch shuts off.

Vertical Action Float

This type of switch has a ball that floats above the water.  As the water level rises, so does the sump switch. Eventually the switch will be triggered to turn on the pump. The sump float switch has limited movement within a vertical rod, so it can only move up and down.  This gives it the benefit of not getting stuck compared to a tethered float.  The down side is that this type of switch does not recognize that the rise of water immediately compared to the diaphragm switch.

Invest In The  Little Giant Piggyback Diaphragm Switch And Avoid Annoying Mechanical Problems

Little Giant diaphragm Switch 599008

Converts any manual pump, up through 1/2 HP (10 max. run amps), to automatic. When mounted to 5-MSP or 6-CIM-R pump, “on” level range is 6″ – 9″ (15.2cm – 22.8cm), “off” level range is 1″ – 4″ (2.54cm – 10.2cm).

Most homeowners tend to use the float switch with their sump pumps which can often lead to challenges with their pump working. In most cases when the sump pump stops working, there is an issue with the switch.

The leading sump complications involves a problem with the switch. This usually occurs when the pump shifts from it’s original position from within the basin.  Although it sounds simple, it is actually a major problem. Your sump pump relies on both the switch and the float arm working smoothly in order to operate adequately.

You can save a lot of headaches by purchasing a diaphragm switch such as the Little Giant Piggyback Diaphragm Switch.

Specifications:

• Horsepower: 1/2
• Cord Length:10′
• Shut Off: 0
• Voltage: 115
• Amps: 10
• Weight: 1.25
• Height: 4.75
• Width: 1.75
• Length: 3

[DKB url=”” text=”” title=”” type=”” style=”” color=”” height=”” width=”” opennewwindow=”” nofollow=””]

The post Avoid Unnecessary Sump Pump Complications With The Little Giant Piggyback Diaphragm Switch appeared first on LittleGiantPumpReviews.com.

Little Giant 506055 Drainosaur Water Pump System

• Pump made of cast iron housing with protective epoxy coating for corrosion resistance
• Screened intake
• 1/3 HP motor with thermal overload protection
• Automatic diaphragm pressure switch enclosed in nylon housing with .on. level at 7″.10″ and .off. level at 1″.4″
• Basin made of polypropylene

Features:

• Pump made of cast iron housing with protective epoxy coating for corrosion resistance
• Screened intake
• 1/3 HP motor with thermal overload protection
• Automatic diaphragm pressure switch enclosed in nylon housing with .on. level at 7″.10″ and .off. level at 1″.4″
• Basin made of polypropylene, light weight, and corrosion resistant
• Basin designed with o-rings to provided a water tight seal
• Basin cover comes with a removable filter screen for easy cleaning
• Cover comes with 1-1/2″ FNPT discharge, a 1-1/2″ FNPT intake opening, and a 2″ FNPT vent opening
• IAPMO listed basin
• Pre-assembled, ready to be installed
• The .DRAINOSAUR. removes water from laundry trays, lavatory sinks, wet bar sinks, dehumidifiers, air conditioners (condensate), water softeners, etc.

Specifications:

• Horsepower: 1/3
• Flow: 2750 ft. @ 5′ of Head
• Cord Length: 8′
• Shut Off: 18′
• Voltage: 115
• Hertz: 50/60
• Amps: 9
• Watts: 720
• Weight: 26
• Height: 15.56
• Width: 14.5
• Length: 14.5

[DKB url=”” text=”” title=”” type=”” style=”” color=”” height=”” width=”” opennewwindow=”” nofollow=””]

The post Little Giant Drainosaur Water Pump System 506055 appeared first on LittleGiantPumpReviews.com.

Little Giant 513240 Simplex Basin and Cover

• Basins available in molded polyethylene or fiberglass
• Complete with necessary sealing hardware and flanges
• Available with 2″ or 3″ vent or discharge flange
• 4″ inlet hub is included with the basin
• Water tight and gas tight when properly installed
• Durable steel gasketed cover standard on fiberglass basin, structural foam cover on poly basin
• One-piece, seam-free construction on basin
• Ready-to-install for simple and economical installation
• Temperature rated up to 130°F

Features:

• Basins available in molded polyethylene or fiberglass
• Complete with necessary sealing hardware and flanges
• Available with 2″ or 3″ vent or discharge flange
• 4″ inlet hub is included with the basin
• Water tight and gas tight when properly installed
• Durable steel gasketed cover standard on fiberglass basin, structural foam cover on poly basin
• One-piece, seam-free construction on basin
• Ready-to-install for simple and economical installation
• Temperature rated up to 130°F
• Fiberglass model will pass the 10 ft. water stack test when installed correctly

Applications:

• Residential, Commercial and Industrial
• Collection of sewage, effluent, drainage and seepage water

Specifications:

• Basins: 18″×30″ molded polyethylene and 18″×30″ fiberglass
• Inlet hubs: 4″ rubber Adaptaflex® for cast iron and PVC pipe
• Covers: Steel, acrylic lacquer dipped or structural foam
• Cord seals: Rubber
• Gaskets: Polyethylene foam with adhesive on one side
• Bolts: Dichromate coated
• Flanges: 2″ and 3″ Adaptaflex®

[DKB url=”” text=”” title=”” type=”” style=”” color=”” height=”” width=”” opennewwindow=”” nofollow=””]

The post Little Giant Simplex Basin 513240 appeared first on LittleGiantPumpReviews.com.