Little Giant 521203 115V Small Submersible Pump 1-MA

Little Giant 521203 115V Small Submersible Pump 1-MALittle Giant 521203 115V Small Submersible Pump 1-MA

Small submersible oil-filled pump with epoxy coated cast aluminum housing. For commercial, industrial, and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This company 170 GPH pump features a 1/4″ MNPT discharge, 7′ shut-off head capability, and screened inlet. Not recommended in the following applications: aquariums, swimming pools, and fuel oil transferring.

Item Number: 521203

Model Number: 1-MA

  • 170 GPH @ 1 ft.
  • Operates submersed
  • 6′ cord
  • Screened side inlet lessens pick-up of settled debris
  • Epoxy-coated aluminum housing
  • 1/4″ MNPT outlet accepts 1/2″ I.D. tubing

Little Giant 505000 Water Wizard 5-MSP 115V 60Hz Utility Pump

Little Giant 505000 Water Wizard 5-MSP 115V 60Hz Utility PumpLittle Giant 505000 Water Wizard 5-MSP 115V 60Hz Utility Pump

Features:

  • Epoxy coated die-cast aluminum housing
  • Oil-filled motor
  • 26.3′ maximum lift
  • 380 watts
  • 1″ FNPT discharge
  • Thermal overload protection
  • For submersible use only

Construction:

  • Motor: 1/6 HP oil filled
  • Intermittent Liquid Temp. up to: 120°F
  • Intake: Screened
  • Discharge: 1″ FNPT
  • Housing: Epoxy coated cast aluminum
  • Cover: Epoxy coated cast aluminum
  • Volute: Nylon
  • Impeller: Nylon
  • Shaft Seal: Viton®
  • Screen: Nylon

Specifications:

  • Horsepower: 1/6
  • Flow: 1200 GPH @ 1′ of Head
  • Cord Length: 10′
  • Shut Off: 26.3
  • Voltage: 115
  • Hertz: 60
  • Amps: 5
  • Watts: 380
  • Weight: 8.25 lbs.
  • Height: 7.75″
  • Width: 4.31″
  • Length: 6.12″

Little Giant 554431 Condensation Removal Pump

Little Giant 554431 Condensation Removal PumpLittle Giant 554431 Condensation Removal Pump

Features:

  • Vertical type pump unit
  • 1/2 gallon leakproof, rustproof, ABS tank with mounting tabs
  • Stainless steel motor shaft
  • 3 drain holes
  • 3/8″ O.D. barbed discharge adapter
  • Built-in check valve
  • Optional Safety Switch
  • 20′ shut-off head
  • 6′ power cord
  • UL/CSA listed
  • Thermal overload protected
  • Suitable for high-efficiency, gas furnace condensate

Construction:

  • Motor: 1/30 HP
  • Intermittent Liquid Temp: up to 120°F
  • Discharge: 3/8″ OD barbed
  • Housing: ABS
  • Cover: ABS
  • Volute: ABS
  • Impeller: Glass filled polypropylene

Specifications:

  • Horsepower: 1/30
  • Flow: 80 GPH @ 1′ of Head
  • Cord Length: 6′
  • Shut Off: 20
  • Voltage: 115
  • Hertz: 60
  • Amps: 1.5
  • Watts: 93
  • Weight: 6
  • Height: 7″
  • Width: 5″
  • Length: 11″

Little Giant 554405 115V 60Hz Condensate Removal Pump

Little Giant 554405 115V 60Hz Condensate Removal PumpLittle Giant 554405 115V 60Hz Condensate Removal Pump

The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation, with guaranteed serviceability and unmatched reliability, Little Giant Pump Company once again defines state-of-the-art in pump design.

Features:

  • Vertical type pump unit
  • 1/2 gallon leakproof, rustproof, ABS tank with mounting tabs
  • Stainless steel motor shaft
  • 3 drain holes
  • 3/8″ O.D. barbed discharge adapter
  • Built-in check valve
  • Optional Safety Switch
  • 15′ shut-off head
  • 6′ power cord
  • UL/CSA listed
  • Thermal overload protected
  • Suitable for High-Efficiency, gas furnace condensate

Construction:

  • Motor — 1/60 HP
  • Intermittent Liquid Temp. up to — 120° F
  • Discharge — 3/8″ OD barbed
  • Housing — ABS
  • Cover — ABS
  • Volute — ABS
  • Impeller — Glass filled polypropylene

Specifications:

  • Horsepower: 1/50
  • Flow: 65 GPH @ 1′ of Head
  • Cord Length: 6′
  • Shut Off: 15
  • Voltage: 115
  • Hertz: 60
  • Amps: 1
  • Watts: 60
  • Weight: 4.6
  • Height: 7″
  • Width: 5″
  • Length: 11″

Little Giant 505202 Water Wizard 230 Volt Sump Pump

Little Giant 505202 Water Wizard 230 Volt Sump PumpLittle Giant 505202 Water Wizard 230 Volt Sump Pump

Features:

  • Epoxy coated die-cast aluminum housing
  • Oil-filled motor
  • 26.3′ maximum lift
  • 380 watts
  • 1″ FNPT discharge
  • Thermal overload protection
  • For submersible use only

Specifications:

  • Motor . 1/6 HP oil filled
  • Intermittent Liquid Temp: up to 120°F
  • Intake:  Screened
  • Discharge: 1″ FNPT
  • Housing: Epoxy coated cast aluminum
  • Cover: Epoxy coated cast aluminum
  • Volute: Nylon
  • Impeller: Nylon
  • Shaft Seal: Viton®
  • Screen: Nylon

Little Giant 502103 Small Submersible Pump with 6′ Power Cord 300 GPH

Little Giant 502103 Small Submersible Pump with 6′ Power Cord 300 GPH

  • 300 GPH @ 1 ft.
  • Operates submersed
  • 6′ cord

Little Giant Pumps offers a huge line of pumps for different applications

little giant waste water pump
Little Giant Pumps has been serving the plumbing industry for over 80 years. All of their products and parts are made with the best materials and the most innovative designs. When they come out with a new pump, the engineers use only the most current technology. Plumbing systems are becoming more and more complex, and there is a real need to keep up with the times.

Little Giant offers a huge line of pumps for different applications, they have Wastewater Pumps, Magnetic Drive Pumps, Pool Pumps and Aquarium Pumps just to name a few. But what happens when you are in need of a new sewage pump for your sewage system? You can turn to Little Giant; they are the leaders in submersible sewage pumps. The 9S Cim is perfect for use in lift stations, as well as for residential homes that may need to pump out sewage or wastewater. The 9S-Cim is able to handle liquids and solid waste up to 2″ in diameter. The pump housing is made from a cast iron material and is protected with an epoxy coating to help protect against corrosion and rust. One of the better features of the 9S-Cim is that it is an oil filled motor housing, meaning that you will never have to worry about filling up your motor again. It will also help protect the motor from getting hot too fast.

Avoid Unnecessary Sump Pump Complications With The Little Giant Piggyback Diaphragm Switch

LITTLE GIANT Piggyback Diaphragm Switch 599008

When professional plumbers require a switch for a sump pump, they most often choose a  diaphragm like the  Little Giant Piggyback Diaphragm Switch.   Most sump pumps have  an average life span of 5-7 years. Most times, if the pump fails before that time, it is due to a problem with the switch. If you’re in need of a new sump switch,  it may be helpful to understand the different options that are available to you.

There are 3 basic switches for sump pumps:

  1. Diaphragm Switch
  2. Vertical Action Float
  3. Tethered Float

Diaphragm Switch

Diaphragm switches such as the Little Giant Piggyback Diaphragm Switch are the best switches for submersible sumps.  When the water level rises, it also increases the pressure and this activates the switch to turn on the sump pump. When the water level drops, the diaphragm switch shuts off.

Vertical Action Float

This type of switch has a ball that floats above the water.  As the water level rises, so does the sump switch. Eventually the switch will be triggered to turn on the pump. The sump float switch has limited movement within a vertical rod, so it can only move up and down.  This gives it the benefit of not getting stuck compared to a tethered float.  The down side is that this type of switch does not recognize that the rise of water immediately compared to the diaphragm switch.

Invest In The  Little Giant Piggyback Diaphragm Switch And Avoid Annoying Mechanical Problems

Little Giant diaphragm Switch 599008

Converts any manual pump, up through 1/2 HP (10 max. run amps), to automatic. When mounted to 5-MSP or 6-CIM-R pump, “on” level range is 6″ – 9″ (15.2cm – 22.8cm), “off” level range is 1″ – 4″ (2.54cm – 10.2cm).

Most homeowners tend to use the float switch with their sump pumps which can often lead to challenges with their pump working. In most cases when the sump pump stops working, there is an issue with the switch.

The leading sump complications involves a problem with the switch. This usually occurs when the pump shifts from it’s original position from within the basin.  Although it sounds simple, it is actually a major problem. Your sump pump relies on both the switch and the float arm working smoothly in order to operate adequately.

You can save a lot of headaches by purchasing a diaphragm switch such as the Little Giant Piggyback Diaphragm Switch.

Heavy Duty Spring Floods Require A Heavy Duty Sump Pump

 

If you are looking for a heavy duty sump pump that can handle large industrial size floods, you may appreciate the Little Giant Sump Pump with 2 HP.  This pump is a submersible pump which means that it is installed in the ground and is specifically created to function underwater.  The sealed, oil filled motor protects the machine from moisture and dust which results in a quieter, longer lasting motor.

little giant sump pump MagnumThis pump is part of the Magnum series of submersible pumps from Little Giant, and is specifically manufactured to handle the tough demanding tasks of sewage waste  with high capability and long lasting durability.

Features:

  • Handles liquids and solid waste materials up to 2″ diameter
  • Cast iron pump housing with protective epoxy coating for corrosion resistance
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
  • Stainless steel screws, bolts and seal assembly
  • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) for long life and reliability
  • 2 HP ball bearing motor
  • Exclusion seal
  • Thermal overload protection on single phase units
  • Capacitor and power cord isolated from oil-filled motor housing for ease of field maintenance
  • Brass impeller

Time To Replace Your Swamp Pump? Try The Little Giant Swamp Cooler Pump

LITTLE GIANT 1/70 HP 307 GPH Swamp Cooler Pump

The swamp cooler sump pump is a critical component for an efficient swamp cooler. If your swamp pump stops working, your house will not become and stay cool.

How A Swamp Cooler Works

Small hose lines supply water to the top of aspen wood pads. Once the water soaks through the pads, it trickles down into a sump pump at the bottom of the swamp cooler.

The sump pump. such as a Little Giant, recirculates the water and sends it back to the top of the pads. The Little Giant swamp cooler pump keeps the pads from drying out.

If your swamp cooler pump stops working and you discover the pads have dried out, then you  most likely need to replace your swamp cooler pump.